Titanium rod filter using titanium powder sintered filter, Titanium Bars generally used for coarse filtration or intermediate filtration. This filter has the advantages of high precision, high temperature resistance, corrosion resistance, high mechanical strength, widely used in the pharmaceutical industry, Titanium Bars the shell material is 316L or 304 stainless steel. Meet the GMP standard.

 

Titanium rod filter in the use of a period of time later, will produce a certain degree of clogging, performance: flow reduction, filtration front pressure increased, such as: from 0.22mPa below 0.3mPa above, Titanium Bars then the filter should be cleaned, cleaning method Generally have the following:

 

1 for the new use of the filter, the general use of water recoil, Titanium Bars gas blowing method to clean, that is slightly larger than the working pressure (such as: 0.3mPa) in the opposite direction of water cleaning water. Recoil time is about 1 to 3 minutes.

 

2. For multiple backwash, the filter effect is not obvious recovery time, Titanium Bars can be less than 5% hydrochloric acid solution, or 8% sulfuric acid solution, or 10% NaOH solution at room temperature soak, and then washed with water The

 

The specific choice of pickling or alkaline washing, Titanium Bars should be regarded as impurities in the filtrate easily soluble in acid or alkali to choose.

 

1. Good sealing, compact structure, easy to damage. Applicable to the production site more harsh working conditions, no maintenance costs;

 

2. The filter solution, adsorbent, catalyst no adsorption loss of the problem, Titanium Bars do not change the original composition of the working medium;

 

3. Non-toxic, non-magnetic, no shedding, biological integration is good, Titanium Bars because of this performance, so titanium rod filter is widely used in the pharmaceutical industry, food and beverage industry;

 

4. Small footprint, high temperature, and good oxidation resistance, Titanium Bars suitable for a variety of acid and alkali salts and a variety of organic solvents, high temperature precision filtration;

 

5. Easy to disassemble, filter structure and diverse, to meet a variety of filtering requirements;

 

6. High filtration accuracy, can be more than 0.2 micron particles particles filter.

 

Titanium rods light weight, high strength, excellent mechanical properties, excellent corrosion resistance. It is widely used in: aerospace, ship, auto parts, bicycle parts, marine engineering desalination, Titanium Bars mariculture, offshore oil drilling, seawater pipeline; power industry in the ocean thermal conversion power station, condenser, steam Turbine Titanium Blades; Chlor-Alkali, Soda, Urea, Titanium Bars and Vacuum Salt Petrochemicals in the Chemical Oil Industry; Electrolysis, Electroplating in Metallurgical Industry; Textile, Papermaking,Titanium Bars Fueling in Light Industry; Equipment Manufacturing in Medical Medical Industry ; The decoration of the construction industry; the manufacture of sports equipment, Titanium Bars the daily life of computers, cameras, watches, glasses, mobile phones, kitchen utensils, and crafts.

 

Titanium is half the weight of steel, so titanium tubing can be made with slightly larger diameters without a weight penalty. Larger diameter tubing provides greater stiffness to efficiently transfer power to the rear wheel without undue flex, all without beating you up over the course of a long ride. It's a magical combination of efficiency and compliance, with geometry, add-ons and options tailored to the wishes of the customer, something that can only be done with metal frames. We also offer tubing with ovalized and special hydroformed cross sections to further fine-tune the properties of the frame.