Titanium rod filter using titanium powder sintered filter, Titanium Bars generally used for coarse filtration or intermediate filtration. The material is 316L or 304 stainless steel, the internal filter for the titanium tube, with a light texture, high temperature, high pressure, strong acid, alkali, Titanium Bars corrosion, filter can be used repeatedly and so on.

 

It is widely used in food, beverage, pharmaceutical, Titanium Bars chemical and other industries of liquid-solid separation, especially in the pharmaceutical industry for large infusion and injection production line decarburization filter. This series of products with a compact and beautiful design according to GMP standard production, Titanium Bars pipe fittings using international standard quick connection, Titanium Bars disassembly and cleaning convenience.

 

1. Good sealing, compact structure, easy to damage. Titanium Bars Applicable to the production site more harsh working conditions, no maintenance costs;

 

2. The filter solution, adsorbent, catalyst no adsorption loss of the problem, Titanium Bars do not change the original composition of the working medium;

 

3. Non-toxic, non-magnetic, no shedding, biological integration is good, Titanium Bars because of this performance, so titanium rod filter is widely used in the pharmaceutical industry, food and beverage industry;

 

4. Small footprint, high temperature, and good oxidation resistance, suitable for a variety of acid and alkali salts and a variety of organic solvents, high temperature precision filtration;

 

5. Easy to disassemble, filter structure and diverse, Titanium Bars to meet a variety of filtering requirements;

 

6. High filtration accuracy, Titanium Bars can be more than 0.2 micron particles particles filter.

 

Titanium rod filter in the use of a period of time later, will produce a certain degree of clogging, performance: flow reduction, filtration front pressure increased, Titanium Bars such as: from 0.22mPa below 0.3mPa above, then the filter should be cleaned, Titanium Bars cleaning method Generally have the following:

 

1. For the new use of the filter, the general use of water recoil, gas blowing method to clean, that is slightly larger than the working pressure (such as: 0.3mPa) in the opposite direction of water water cleaning. Titanium Bars Recoil time is about 1 to 3 minutes.

 

2. For multiple backwash, the filter effect is not obvious recovery time, can be less than 5% hydrochloric acid solution, or 8% sulfuric acid solution, or 10% NaOH solution at room temperature soak, Titanium Bars and then washed with water The

 

The specific choice of pickling or alkaline washing, Titanium Bars should be regarded as impurities in the filtrate easily soluble in acid or alkali to choose.

 

Characteristics of titanium rods

 

1. The high temperature resistant

 

Titanium filter resistance to high temperature can reach 300 ° C, this is unmatched by other filter.This feature is widely used in high-temperature working environment, and polymer filter, their degree of heat resistance is poor, is generally not more than 50 ° C, more than 50 ° C its support and membrane will be change, filtration precision appear large deviation.Even four fluorine filter above 120 ° C, the long-term work pressure of 0.2 MPa working environment also can appear the phenomenon such as deformation, aging.The titanium rod filter can be used in this environment for a long time.

 

Widely used: filtration of high temperature liquid, steam filtration (vapor filtration in fermentation process), air filtration at normal temperature.