Room 703,No.28 Huahai Road.Economic and technical development zone,Shenyang P.R.China
WE ARE COMMITTED TO PROVIDING CUSTOMERS WITH
HIGH QUALITY PRODUCTS,COMPETITIVE PRICES AND EXCELLENT SERVICES
Gr12 Titanium wires
Titanium and titanium alloy wire TA10 and other types of coiled wire/straight wire
Surface: 1 shiny surface, 2 pickled surface,
Uses: Mainly used for welding titanium equipment and pressure vessels, and weaving titanium mesh
Material: Gr12, etc.
Standard: GB/T 3623-2007 NB/T 47018.7-2011 AWSA 5.16-2007 JB/T 4745-2007
Titanium is a new type of metal. The performance of titanium is related to the content of impurities such as carbon, nitrogen, hydrogen, and oxygen. The purest titanium iodide has an impurity content of no more than 0.1%, but its strength is low and its plasticity is high. The performance of 99.5% industrial pure titanium is: density ρ=4.5g/cubic centimeter, melting point is 1725℃, thermal conductivity λ=15.24W/(mK), tensile strength σb=539MPa, elongation δ=25%, section Shrinkage ψ=25%, elastic modulus E=1.078×105MPa, hardness HB195.
The density of titanium alloy is generally about 4.51g/cm3, which is only 60% of steel. The density of pure titanium is close to that of ordinary steel. Some high-strength titanium alloys exceed the strength of many alloy structural steels. Therefore, the specific strength (strength/density) of titanium alloy is much greater than other metal structural materials, and parts with high unit strength, good rigidity and light weight can be produced. The aircraft's engine components, skeleton, skin, fasteners and landing gear all use titanium alloys.
High thermal intensity
The service temperature is several hundred degrees higher than that of aluminum alloy. It can still maintain the required strength at medium temperature. It can work for a long time at a temperature of 450～500℃. These two types of titanium alloys are still very high in the range of 150℃～500℃. Specific strength, while the specific strength of aluminum alloy decreases significantly at 150°C. The working temperature of titanium alloy can reach 500℃, while that of aluminum alloy is below 200℃.
Good corrosion resistance
Titanium alloy works in moist atmosphere and seawater medium, its corrosion resistance is far better than stainless steel; it is particularly resistant to pitting corrosion, acid corrosion, and stress corrosion; it is resistant to alkali, chloride, chlorine organic substances, nitric acid, sulfuric acid It has excellent corrosion resistance. However, titanium has poor corrosion resistance to media with reducing oxygen and chromium salts.
Good low temperature performance
Titanium alloys can still maintain their mechanical properties at low and ultra-low temperatures. Titanium alloys with good low temperature performance and extremely low interstitial elements, such as TA7, can maintain a certain degree of plasticity at -253°C. Therefore, titanium alloy is also an important low-temperature structural material.