Room 703,No.28 Huahai Road.Economic and technical development zone,Shenyang P.R.China
WE ARE COMMITTED TO PROVIDING CUSTOMERS WITH
HIGH QUALITY PRODUCTS,COMPETITIVE PRICES AND EXCELLENT SERVICES
All rights reserved Shenyang Bona Titanium Technology Co.,Ltd. 辽icp备17016579号Powered by300.cn shenyang.300.cn
Gr1, Gr2, Gr5 Titanium plates
American brand: GR1, Gr2, GR3, GR5, GR7, Gr12
Russian brand: BT1-00, BT1-0, BT6, etc
Chinese brand: TA0, TA2, TA3, TA5, TA6, TA7, ta9, TA10, TB2, Tc1, TC2, TC3, TC4
Titanium plate manufacturing process:
Hot forging is performed at a temperature above the metal recrystallization temperature.
Hot rolling is a rolling process performed at a temperature above recrystallization.
The rolling process of cold-rolled concrete with a plastic deformation temperature lower than the recovery temperature.
Annealing: A metal heat treatment process that slowly heats a metal to a certain temperature, holds it for a sufficient time, and then cools it at a suitable rate (usually slow cooling, sometimes controlled cooling).
Pickling: The product is immersed in an aqueous solution of sulfuric acid or the like to remove thin films such as oxides on the metal surface. Pre-treatment or intermediate treatment of electroplating, enamel, rolling and other processes
Features of titanium plate:
1. Titanium seed plate is an oxide film on the surface, which is equivalent to a good durable abrasion-resistant hair release agent. The use of titanium seed plate saves the release agent and makes the electrode plate easy to peel off. The board is half lighter than a copper seed board.
2. The service life of titanium seed board is more than 3 times that of copper seed board. Depending on the operating conditions, it can reach 10 to 20 years.
3. The crystal structure of electrolytic copper made from titanium seed plate is dense, the surface is smooth and smooth, and the quality is excellent.
4. Since the titanium seed board does not need to be coated with a separating agent, it can avoid the contamination of the copper electrolyte.
5. Increasing production capacity and reducing the production cost of electrolytic copper, which has better economic benefits.
Grades: ERTi-1, ERTi-2, ERTi-3, ERTi-4, ERTi-5 titanium welding wire
Titanium tube for bicycle and motorcycle