Under petroleum machining conditions, the following titanium equipment can be made from titanium alloys: titanium heat exchangers, filters, storage tanks for storing petroleum and petroleum products, locking devices, sewage lines and rough oil lines.

   For evaporation or distillation, or in a weak acid or other chloride-containing solution, a titanium-lined vessel can be used, followed by nitriding the organic material with nitric acid and chemically reacting with other iso-oxidizing media. The container can also utilize a container with a titanium liner. Both the chromic acid containing solution and the vulcanized chromic acid solution may be selected from such a titanium lined container depending on the reaction temperature.

   In a certain range of applications in the field of chemical raw materials, it has been confirmed that copper and other vapor-containing solutions can be used as catalysts under the conditions of catalytic oxidation of chlorocarbons with a defined pH. Then, when catalysis is carried out at a temperature greater than 150-200 t: t, corresponding equipment must be provided, and acetaldehyde preparation equipment made of titanium is widely used. Towers, pipes, valves using titanium as a lining, and acid pumps consisting of a rotor and a stator are all made of engineered titanium. Distillation columns are often used for acetic acid purification, and most of the accessories included in the split stage are made from vegetables. For example, the intermediate layer of the tower and the connecting member for the distillation apparatus.

   A serpentine tube heater that blocks the formation of metal sulphate and has been tested to increase heat transfer by 30% compared to aluminized copper tube heaters. For the urea reactor, in order to obtain carbon black and to eliminate stress, a reaction tower with a diameter of 43 m and a length of 8.2 m which is subjected to a pressure of 120 T: temperature and 130 KPa is used, and the reaction tower is required to reduce the pressure of gas and other various gases. The equipment is made of titanium.

   The field of application of titanium is further extended to the crude oil and petroleum processing industries. Titanium is used in desalination equipment for the production of fresh water or drinking water from seawater or in the production of organic acids. At the same time, pumps and conduits and heat exchangers made of welded titanium tubes are proven to be reliable and durable. When copper is electrolyzed, a titanium plate for a titanium cathode is produced using a titanium plate.